Product
Precision 1.5 mm Rubber Sheet Rolls & Pre-Cut Panels (SBR, NBR, CR, EPDM, NR, FKM)
Product Name: Precision Industrial Rubber Sheet (1.5mm to 12mm Panels & Rolls)
Featured Gauge: 1.5 mm Rubber Sheet (Ultra-thin precision gasket material)
Standard Pre-Cut Panel Sizes: 1 m x 600 mm | 1 m x 1.2 m (Continuous rolls up to 1.5m width available)
Available Polymers: SBR, NBR (Nitrile), CR (Neoprene), EPDM, NR (Natural Rubber), FKM (Viton)
Thickness Range: 1.5mm, 3mm, 6mm, 10mm, 12mm
Surface Finish: Smooth both sides, cloth finish, or 3M adhesive backing
Primary Applications: Die-Cut Pipe Flange Gaskets, Hydraulic Seals, Chemical Linings, HVAC Dampening, Electronic Enclosure Seals
Factory Direct Supply: Looking for immediate stock or custom size quotes for 1.5 mm rubber sheet or pre-cut panels? Get an instant export quotation today!
Standard Pre-Cut Panel Dimensions & Weight Specification Guide
| Dimensions (L x W x T) | Area (m²) | Thickness Gauge | Primary Application / Gasket Class |
|---|---|---|---|
| 1 m x 600 mm x 1.5mm | 0.60 m² | 1.5 mm Precision Sheet | Precision instrument seals, thin flange gaskets |
| 1 m x 600 mm x 3mm | 0.60 m² | 3.0 mm Sheet | Standard pipe gaskets, workbench protection |
| 1 m x 600 mm x 6mm | 0.60 m² | 6.0 mm Sheet | Medium pressure seals, anti-vibration strip pads |
| 1 m x 600 mm x 10mm | 0.60 m² | 10.0 mm Sheet | Heavy machinery pads, impact absorbing blocks |
| 1 m x 600 mm x 12mm | 0.60 m² | 12.0 mm Sheet | Heavy equipment isolation pads, structural bumpers |
| 1 m x 1.2 m x 1.5mm | 1.20 m² | 1.5 mm Precision Sheet | Large format thin flange gaskets, enclosure lining |
| 1 m x 1.2 m x 3mm | 1.20 m² | 3.0 mm Sheet | Full-face pipe flange gaskets, HVAC sealing mats |
| 1 m x 1.2 m x 6mm | 1.20 m² | 6.0 mm Sheet | Heavy flange joint seals, machine mounting sheets |
| 1 m x 1.2 m x 10mm | 1.20 m² | 10.0 mm Sheet | Chute lining, heavy structural anti-vibration mats |
| 1 m x 1.2 m x 12mm | 1.20 m² | 12.0 mm Sheet | Ultra-heavy vibration damping slab, bridge base pads |
* Note: Weights are calculated based on standard 1.5 g/cm³ specific gravity. Weights for FKM (SG ~2.0) will be higher. Custom length continuous rolls (e.g. 1.2m x 10m) are also available.
Elastomer Material Selection Guide (SBR, NBR, CR, EPDM, NR, FKM)
| Elastomer Type | Operating Temp. Range | Key Resistant Media | 1.5mm Sealing Advantage | Recommended Application |
|---|---|---|---|---|
| SBR Rubber | -400°C to +70°C | Water, air, inert gases | Economical general purpose flange sealing | General gaskets, HVAC seals, protective mats |
| NBR (Nitrile) | -35°C to +100°C | Oils, fuels, diesel, grease | Zero swelling in petroleum environments | Fuel line gaskets, oil seals, automotive pads |
| CR (Neoprene) | -35°C to +80°C | Seawater, weather, mild oils | Flame retardant, outdoor ozone resistance | Marine hatch seals, outdoor enclosure gaskets |
| EPDM Rubber | -40°C to +100°C | Hot steam, water, acids, UV/ozone | Unmatched weatherability & steam seal | Outdoor pipe gaskets, solar & HVAC seals |
| NR (Natural) | -50°C to +100°C | Abrasive slurry, dynamic shock | Extreme tensile strength & high tear resistance | Dynamic joint seals, impact pads, chute lining |
| FKM (Viton) | -60°C to +350°C | Aggressive acids, solvents, high heat | Maximum chemical immunity & heat endurance | Chemical processing gaskets, aerospace seals |
Precision 1.5 mm Rubber Sheet Rolls & Pre-Cut Gasket Panels
In high-precision fluid sealing and industrial gasket die-cutting, thickness accuracy is paramount. Our 1.5 mm rubber sheet products are manufactured under strict calendered production controls to ensure uniform gauge consistency across the entire width and length. A precision rubber sheet 1.5 mm thick provides the ideal balance between flexibility, seal compressibility, and structural tear resistance when torqued between pipe flanges.
Whether you require standard roll goods for mass die-punching or convenient pre-cut industrial panels such as 1 m x 600 mm x 1.5mm or 1 m x 1.2 m x 1.5mm, our factory delivers reliable performance tailored to your exact operational environment.
Versatile Thickness Gauges & Panel Sizes
To support diverse engineering requirements, we supply pre-cut sheet panels in two standard footprint sizes across 5 primary thickness gauges:
- 1 m x 600 mm Series: Highly popular for compact workshop benches, small equipment mounting, and precision die-cutting. Available dimensions include 1 m x 600 mm x 1.5mm, 1 m x 600 mm x 3mm, 1 m x 600 mm x 6mm, 1 m x 600 mm x 10mm, and 1 m x 12mm.
- 1 m x 1.2 m Series: Standard full-width industrial sheets suitable for large flange ring gaskets and surface lining. Available dimensions include 1 m x 1.2 m x 1.5mm, 1 m x 1.2 m x 3mm, 1 m x 1.2 m x 6mm, 1 m x 1.2 m x 10mm, and 1 m x 1.2 m x 12mm.
6 Specialty Polymers for Every Chemical & Thermal Challenge
We compound our 1.5mm precision rubber sheeting using 6 distinct rubber polymers:
- SBR Sheet: Economical choice for ambient water, air, and general purpose flange seals.
- NBR Nitrile Sheet: Specially formulated for fuel line gaskets, oil seals, and automotive applications.
- CR Neoprene Sheet: Weather, ozone, and flame-resistant sheet ideal for marine hatch seals and outdoor installations.
- EPDM Sheet: Outstanding resistance to hot water, low-pressure steam, UV exposure, and outdoor weathering.
- NR Natural Rubber Sheet: Exceptional dynamic resilience, high tear strength, and abrasion resistance.
- FKM (Viton) Sheet: Premium fluoroelastomer engineered for extreme temperature endurance (+250°C) and aggressive acid/solvent sealing.
Request Wholesale 1.5 mm Rubber Sheet Quotation
Contact our technical sales team for physical sample swatches, custom gasket die-cutting services, or direct factory pricing on 1.5 mm rubber sheet rolls and pre-cut panels:
Manufacturer: Tianjin China Rubber Co., Ltd.
Contact Person: Carrie Kang
Tel / WeChat / WhatsApp: +86 13821173226
Email: sales@chn-rubber.com
