Product
Factory-Direct High-Temperature FKM Viton Rubber Gasket Sheet Material
Extreme-Condition FKM Viton Rubber Sheet Material
Engineered to withstand temperatures up to 250°C and aggressive chemical media, our premium fkm viton rubber rolls serve as the definitive high-performance rubber gasket sheet material for critical industrial sealing.
Preventing Premature Flange Joint Failures
Unlike standard synthetic rubbers that harden and crack during thermal cycling, this resilient fkm viton rubber compound retains its dynamic elasticity from continuous hot cycles down to sub-zero states.
Highly resistant to aggressive petroleum fuels, fuels, and organic acids. It exhibits negligible volume expansion, preventing seal blowouts and critical mechanical pressure drops.
Engineered as a stable rubber gasket sheet material, its low compression set ensures constant flange pressure over prolonged, uninterrupted service lifetimes.
Physical Parameters & Mechanical Integrity
All physical specs listed below represent verified laboratory batch testing of our standard commercial grades. Custom formulations for higher tensile strength are available on demand.
| Grade / Identification | Specific Gravity | Hardness (Shore A) | Tensile Strength | Max Temp (Continuous) |
|---|---|---|---|---|
| ZXZ-VT70-001 | 1.90 g/cm³ ± 0.05 | 70 ± 5 | > 8.0 MPa | 260°C |
| ZXZ-VT70-002 | 2.0 g/cm³ ± 0.05 | 75 ± 5 | > 6.0 MPa | 260°C |
Uncompromised Fluid Blockade
When standard industrial washers or seals begin to weep under structural strain, upgrading to high-purity fluoroelastomer is the most dependable countermeasure. Our factory compound relies on a highly fluorinated polymer chain that blocks fluid diffusion at the molecular level.
Our rubber gasket sheet material rolls are manufactured with a completely uniform thickness, eliminating localized weak spots that could buckle during high-torque flange bolting. This ensures distribution partners and large-scale industrial buyers receive reliable, consistent stock for precision gasket conversion.
B2B Transit Protection System
FKM rolls are heavy and susceptible to core collapse if packed incorrectly. We wrap each individual fkm viton rubber roll in strict, thick waterproof plastic sheeting and load them into custom reinforced wooden crates. This avoids surface abrasions, flattened roll cores, or atmospheric ozone degradation while in transit across global ocean routes.
Direct Factory Procurement
We focus exclusively on high-volume B2B wholesale supply. If you require free cut-samples, technical compound datasheets, or custom roll sizes, reach out to our overseas sales department.
Sales Manager: Carrie Kang
WeChat / Tel: +86 13821173226
WhatsApp: +86 13821173226
Email: sales@chn-rubber.com
Technical responses and custom pricing within 24 hours.
